Rising Sun Cycles LLC   Racer's Parts in Racer's Time
RISING SUN CYCLES
HOME|CONTACT

Road Racing, OEM & Aftermarket Parts and Accessories

News and Important Announcements Racing Motorcycles
and Motors For Sale
Accessories
and Product Index
Tools Specials & Clearance BLOG

Additional Brake Manufactures and Products - CLICK HERE

Brembo Brakes

Universal
30-34 seal kit

Seal kit for some calipers with 30mm and 34mm pistons

For years we have been told that the Brembo OEM Calipers which come on many of the bikes including our RS125 Honda were not rebuildable. Here is a solution to this problem!  These will fit those Brembo OEM calipers that we have been trying to rebuild on the RS125s

Part Number YB3034 $49.98

If you are trying to rebuild the STD OEM calipers, there is no piston kit available for these but one of our Brembo importers came up with this seal kit. 

The full race versions from Brembo are rebuild-able and they would have the name Brembo in Red printed on them. see 20.4756.62 on the same page. The OEM production units have silver painted logos or no paint at all.

The 120.2799.50 pistons in the kits below will fit the bore but are not the correct depth so they should not be used in the OEM replacement calipers.

Cost of the OEM calipers are a $200 or less replacement cost while the full race units are $600 and up. So, they (the OEMs or Brembo) have decided that if the OEM calipers get to a point of needed new pistons, they should be replaced.

30/34 Caliper 2 Piece Billet GP- Right -Front  Brembo 40mm Bolt Center 20.4756.62
30/34 Caliper 2 Piece Billet GP- Right -Front Brembo 40mm Bolt Center
Brembo billet GP racing caliper that has been a performance upgrade for decades. This brembo caliper is about 1/4 lb lighter than the cast caliper, and stiffer. The brembo billet GP caliper is designed for superior pad retraction, and because of this, if a favorite for serious racers.
120.2799.50
30/34 Piston/Seal kit for 4 Piston GP Caliper - Gold Line Calipers Brembo

 


For 20.4756.62 Caliper above only
BREMBO 19 RCS RADIAL BRAKE MASTER CYLINDER
The Brembo radial master cylinder has effectively revolutionized motorcycle braking systems over the past ten years. Designed originally for use on Racing machines, it has become more and more popular over time for Super Sport, and even Naked bikes, while retaining the identity of an out-and-out racing component, still used today in MotoGP competition. For more information CLICK HERE
110.A263.10  $365.00 
10.4760.75
19x18 Brake Master Cylinder with Folding Lever

Forged race type master cylinder with pre-installed folding brake lever.
10.4760.85
16x18 Brake Master with Folding Lever

Forged race type master cylinder with pre-installed folding brake lever.
10.4760.80
16x18 Brake Master Cylinder- Brembo Radial Pump

Master cylinder for single caliper front brake set up. When ordering a replacement lever, be sure to match the pivot length of the lever with the pivot length of the master cylinder (2nd number)

 

10.4760.70
19x18 Brake Master Cylinder- Brembo Radial Pump
Radial racing master cylinder for dual disc brake fornt ends. The 19x20 model gives the stiffest brake lever, the 19x18 lever provides a little more feel, and a lighter pull on the lever is required. When ordering a replacement lever, be sure to match the pivot length of the lever with the pivot length of the master cylinder (2nd number)

  

10.4760.60
19x20 Brake Master Cylinder- Brembo Radial Pump
Radial racing master cylinder for dual disc brake front ends. The 19x20 model gives the stiffest brake lever, the 19x18 lever provides a little more feel, and a lighter pull on the lever is required. When ordering a replacement lever, be sure to match the pivot length of the lever with the pivot length of the master cylinder (2nd number)

 

110.4266.60
Repair Kit- Brembo Radial Pump Master Cylinder

Crash repair kit for the race series radial pumps. This kit contains the aluminum top hat and push rod that always gets bent. Keep one in the spares kit

 

110.4594.60
Long Lever 20mm Kit Brembo
 (can use Honda 53175-NX5-680)

 
110.4594.61
Long Lever 18mm Kit Brembo

 
18mm Radial Folding lever kit
110.5231.16
18mm Radial Folding lever kit
Folding lever for " X 18 " size radial brake or clutch master cylinders
18mm Radial Short Lever
110.7264.32
18mm Radial Short Lever
Brembo short lever for radial master cylinder. Lever is 25mm shorter than standard length lever.
 
10.5107.10 - Spare Adjustment Knob
10.5107.10
Spare Adjustment Knob

A51.1010.46
Roll pin to attach knob to radial master cylinders

105.3387.10 - Bleeder Screw for New Style F08 Brembo
105.3387.10
Bleeder Screw for New Style F08 Brembo


Thread - M10x1.0
Length Under Hex - 16mm
Wrench Size 11mm
Color - Silver
105.3387.60 - Bleeder Set for GPmk3 Billet Caliper and radial pump
105.3387.60
Bleeder Set for GPmk3 Billet Caliper and radial pump
A63.1010.90 - Clip
A63.1010.90
Clip for Brembo Cast Iron Floating Brake Rotor
A34.0400.14 - Washer
A34.0400.14
Washer for Brembo Cast Iron Floating Brake Rotor - .5mm thick, 20mm OD x 14mm ID
Pin for 30/34 Billet Caliper Brembo
120.3840.81
Pin for 30/34 Billet Caliper Brembo

VF1/1
M10x1.0 Banjo + Bleeder
 

VF1/2-28
Double Bolt M10x1x28mm

VF1/2-30
Double Bolt M10x1x30mm

 

06.2228.22 - Double Banjo Bolt M10x1.0  Steel For Brembo TBD
06.2228.22
Double Banjo Bolt M10x1.0 Steel For Brembo TBD
06.2228.45 - Single Banjo Bolt  M10x1.0x19 Steel For Brembo
06.2228.45
Single Banjo Bolt M10x1.0x19 Steel For Brembo

09-29001-00
Aluminum Washers
Washers for aluminum banjo bolts
  
06.2196.13 - Copper Washer  10mm For Brembo
06.2196.13
Copper Washer 10mm For Brembo - Crush washer for use with steel banjo bolts. Priced each, but only sold in packages of 10.
10.4446.50 - 15cc Reservoir Remote 45 fitting - Brembo
10.4446.50
15cc Reservoir Remote 45 fitting - Brembo, 15cc resorvoir for rear brake or clutch applications.
10.4446.40 - 15cc  Reservoir Remote Straight Fitting - Brembo
10.4446.40
15cc Reservoir Remote Straight Fitting - Brembo 15cc resorvoir for rear brake or clutch applications.
10.4446.30 - 30cc Reservoir Flange Mount- Screw Cap - Brembo
10.4446.30
30cc Reservoir Flange Mount- Screw Cap for front brake applications - Brembo
19.6371.26
6mm Clear Tubing For Brake Fluid - Brembo Size


This is the only clear tubing on the market that will not sweat, crack, discolor or harden. Tubing is sold by the foot.