Rising Sun Cycles LLC   Racer's Parts in Racer's Time
RISING SUN CYCLES
HOME|CONTACT

Road Racing, OEM & Aftermarket Parts and Accessories

News and Important Announcements Racing Motorcycles
and Motors For Sale
Accessories
and Product Index
Tools Specials & Clearance BLOG
 

Instructions for reversing the Battle Rod Switch between Compression and Extension.


BS4-STD-5 BATTLE SHIFTER
PULL SWITCH TYPE
motorcycle (R5FL6-90-ML6)
These instruction are for changing the switch to opposite function if needed.

In this example we are starting with an Extension switch which is what is normally used in most GP style shift patterns (1 down and 4 or 5 up)

 

With a 12mm and 15mm wrench, loosen the female barrel shown on the right in this picture and remove the lock nut on the opposite side.

BS4-STD-4 BATTLE SHIFTER
PUSH SWITCH TYPE
motorcycle (R4FL6-90-ML6)
Then simply swap the two parts and reassemble.

Note: now that the switch is setup for compression function it is very important to leave approx 1mm of thread showing next to the lock-nut when you attached the shift rod to the switch. Never run the nut down to bottom for either application.